Electric AutoSampler™ Series Belt Sampler
The CLEAN SWEEP® AutoSampler™ represents the state-of-the-art in sweep sampler design. The CLEAN SWEEP® AutoSampler™ is a top-of-the-belt sweep sampler designed to mount to the top chord of a conveyor and normally retrofit to the conveyor truss between existing
35-degree idlers. JBLCo provides complete, pre-assembled and pre-tested equipment directly from JBLCo’s factory.
The sampler removes each sample increment from the loaded, moving conveyor with a single
360-degree rotation of an open faced Divider/Sweep (or cutter) in a plane perpendicular to material flow. The sample increments are then delivered to save sample containers or to optional secondary sub-systems. The sampler is monitored during and between sample increments (or cuts) to detect any errors that could prevent sampling or interfere with the conveyor.
CUT CYCLE: CLEAN SWEEP® samplers employ an open faced rotating Divider/Sweep (cutter) operating in a 360-degree arc perpendicular to material flow on the belt conveyor to divide and sweep sample increments from the moving, loaded conveyor.
 |
 |
||||
|
1. Parked Position
|
2. Cut Cycle Begins | ||||||
| Cutter positioned approximately off edge of conveyor blocks sample discharge and prevents contamination. |
Electric drive powers cutter rotation; spring mounted impact idlers eliminate sag. |
||||||
 |
 |
| 3. Sample Increment Divided | 4. Sample Increment Ejected | |||||
| Scooping angle fully contains each increment in cutter; complete, visually verifiable removal. |
Cutter stops at the original parking position. |
|||||
